Filter
Top Products
158
D
ATA-TRANSFER MODE
PICTBRIDGE
Use the left/right keys of the controller to
display the image to be printed.
Total number of prints
Number of copies
Press the up key to select the number of
copies to be printed. To deselect an image
for printing, press the down key until the
number of copies reaches zero. A
maximum number of fifty images can be
printed.
Repeat the previous steps until all the images to be printed are selected. Press
the central button of the controller to continue.
The information (i+) button switches between the single frame and index playback
formats on the PictBridge screen. Enlarged playback, activated with the magnification
button, can be used to examine image files on the screen.
Confirm the transfer-mode option in section 1 of the setup
menu is set to PTP. Connect the camera to a PictBridge
compatible printer using the camera’s USB cable. The larger
plug on the cable is connected to the printer. Open the AV
out/ USB port cover and insert the smaller plug of the cable
into the camera. Turn the camera on; the PictBridge screen
is displayed automatically.
:select:move :print
Individual still images can be selected for printing on the PictBridge screen; TIFF, RAW
and images with an embedded color profile (p. 102) are not displayed and cannot be
selected. For other printing options, see the menu navigation section on page 160.