Konica Minolta A2 Digital Camera User Manual


 
26
G
ETTING UP AND RUNNING
INSERTING AND CHANGING A MEMORY CARD
A memory card must be inserted for the camera to operate. If a card
has not been inserted, a no-card warning will be displayed on the
monitors. Type I and II CompactFlash cards and IBM Microdrives are
compatible with this camera. For memory card care and handling, see
page 169.
Open the card-slot door in the direction indicated.
Always turn off the camera and confirm the access lamp is not lit
before inserting or removing a memory card, otherwise the card may
be damaged, and data lost.
Insert a memory card all the way into the card slot. Insert the card so
the face is toward the front of the camera. Always push the card in
straight. Never force the card. If the card does not fit, check that it is
oriented correctly.
Close the card-slot door.