Filter
Top Products
:enter
Save to memory
:select
72
A
DVANCED RECORDING
MEMORY - STORING CAMERA SETTINGS
To save the current camera settings, turn the function dial to
the M SET position and press the function button to open the
register-selection screen; the current camera settings are
displayed.
Camera settings cannot be deleted from memory by turning the camera off. They are
erased with the reset function in section 3 of the setup menu.
On the register-selection screen, use the control
dials or left/right keys of the controller (1) to select
the memory register in which to store the settings;
any previous settings are replaced. Press the
central button of the controller (2) to complete the
operation. The menu button cancels the operation
without saving the settings.
2
1
Five sets of camera settings can be saved. This saves time under frequently repeating
conditions by eliminating the need to set the camera. Except for functions like subject
programs, data imprinting, voice memo, and instant playback, most recording-mode
camera settings will be saved including the position of the Flex Focus Point, the display
mode, and changes made with the function dial and digital effects control. Setting are
displayed before being saved. Although the Digital Effects bracketing drive mode setting
can be saved, the type of bracket, contrast, color saturation, or filter, must be reset with
the Digital Effects Controller.