Filter
Top Products
2
SPOT AE AREA
When using spot metering (p.
69) with the Flex Focus Point
(p. 48), the position of the spot
metering area can be specified
at the center of the live image
or linked to the Flex Focus
Point; the spot moves after the
position of the FFP is set. This
is set in section 4 of the
recording menu (p. 80).
Center spot With Flex Focus Point
DIRECT MANUAL FOCUS
Direct manual focus allows manual adjustments to be made after the AF system has
locked onto the subject. Direct manual focus is activated in section 4 of the recording
menu (p. 80). Direct manual focus is canceled when continuous AF or manual focus (p.
46) is in use.
1
As described in the basic recording operation
section (p. 33), press the shutter-release button
partway down to lock the focus (1); the focus
signal will turn white. “DMF” will be displayed next
to the drive-mode indicator.
While holding the shutter-release button partway
down, the camera can be manually focused with
the focusing ring (2). Always use the monitor
image to confirm focus. The approximate focusing
distance is displayed next to the frame counter. If
active, the Flex Digital Magnifier (p. 105) can be
used.
107