Filter
Top Products
122
A
DVANCED PLAYBACK
COPY
Image files can be copied from one memory card to another. Up to 29MB of data can be
transferred. Every time the copy function is used, a new folder is automatically created
for the image(s).
This frame - To copy the image currently displayed.
Marked frames - To copy single or multiple images. When selected, the frame-selection
screen (p. 118) will appear; highlight the images to be copied with the yellow border and
then press the up key of the controller to mark it with the check indicator. To deselect an
image, highlight the selected thumbnail and press the down key; the check indicator will
disappear. Continue until all the images are marked. Press the central button of the
controller to continue, or press the menu button to cancel the operation and return to the
playback menu.
When the controller is pressed, a screen with four
messages will be displayed; the messages are highlighted
as the copying procedure is executed. If too many images
have been selected, a warning will appear and the copy
routine will be canceled. Divide the number of images into
two or three batches.
When the change-CF-card message is highlighted,
remove the camera’s memory card and insert the card to
which the image should be copied. If the card has
insufficient space, the card-full warning is briefly
displayed; insert a different card or press the menu button
to cancel the routine. Press the central button of the
controller to continue.
Change CF card.
Copying to CF card.
Copying completed.
Enter
Copy
Copying to camera memory.