Filter
Top Products
136
S
ETUP MENU
CUSTOM SETUP
The one frequently used function can be allocated to the
custom position on the function dial. The function is
selected in section 2 of the setup menu (p. 130). The
following recording functions are available:
Custom set Image size
File # memory Quality
Folder name Flash mode
Select folder
New folder
Date/Time set DOF preview
Flash control
Color mode
Image size (p. 82)
Image quality (p. 82)
Flash mode (p. 86)
Flash control (p. 92)
Depth-of-field preview (p. 77)
Color mode (p. 102)
In the recording mode, the function specified in
the menu is set with the function dial. To use
depth-of-field preview, see page 77.
Turn the function dial to the custom position (1).
Press the function button in the center of the dial
(2). Turn the front or rear control dials to select the
setting (3). Press the shutter-release button
partway down or press the function button to
complete the operation. Also see camera notes
on page 65.
3
3
2
1
FILE NUMBER (#) MEMORY
When file number memory is selected, if a new folder is created, the first file stored in the
folder will have a number one greater than the last file saved. This allows multiple folders
to be created to store images by category, place, or date, but the image file numbers will
be in the order in which they were shot. If the file number memory is disabled, the image
file name will have a number one greater than the last image saved in the folder.
If file number memory is active and the memory card is changed, the first file saved to
the new card will have a number one greater than the last file saved on the previous card
if the new card does not contain an image with a greater file number. If it does, the file
number of the new image will be one greater than the greatest on the card.