Filter
Top Products
143
ANTI-SHAKE
When the Anti-shake system activates can be changed in
section 4 of the setup menu. Two options are available:
Display + Exp. - when the shutter-release button is
pressed partway down, the anti-shake function will activate
if on. The affect of the Anti-shake system can be seen in the
live image.
Anti-shake Display + Exp
Full-time AF Off
Grip sensor On
Ctrl dial set
Manual exp.
Delete conf. “No”
SS F/no.
SS
F/no.
Exposure - Anti-shake is only applied during the exposure and is not apparent in the live
image. When the shutter-release button is pressed partway down, wait a moment before
taking the picture for the Anti-shake system to stabilize the image.
FULL-TIME AF
Full-time AF continually focuses the camera so the monitor image is always sharp. When
the grip sensor is on, full-time AF is activated when the camera is held; the eye sensor is
also employed when using the EVF. With the grip sensor off, full-time AF is always active
when using the LCD monitor and activated by the eye sensors when using the EVF.
When full-time AF is on, the EVF mode (p. 108) frame rate is set to 30fps.
GRIP SENSOR
The grip sensor conserves power by only activating the full-
time AF function when the camera is held. The grip sensor
also works with the eye sensors when the EVF auto on
option is used, see page 135.
The grip sensor can be turned off when the camera is
mounted on a tripod so that full-time AF and the EVF auto
on function can be used. Wearing gloves may prevent the
grip sensor from working. The sensor is controlled in
section 4 of the setup menu.
Grip sensor