Filter
Top Products
100
R
ECORDING MENU
DSP (DIGITAL SUBJECT PROGRAM) SETUP
The memory registers used for camera settings can be
assigned to the Digital Subject Program positions on the
exposure-mode dial. This is set in section 3 of the recording
menu (p. 84). Two options are available:
DSP - the Digital Subject Programs are active on the
exposure-mode dial.
Memory recall - the memory register are assigned to the
Digital Subject Program positions as indicated in the
illustration.
For more about Digital Subject Programs, see page 58. To
save camera settings turn to page 98.
This function reduces the affect of dark noise caused by
long exposures. Noise reduction is applied to exposures of
1/2 second or longer. Processing is applied to each image
after it is captured. The monitor remains blank during
processing for a maximum of 30 seconds. Noise reduction
uses dark-frame subtraction. Noise reduction can be
applied when operating temperatures are high regardless
of the shutter speed. Noise reduction can be turned off in
section 3 of the recording menu.
NOISE REDUCTION
Memory
DSP set
Noise reductn
On
Monitor amp.
Off
Manual exp.
Digital zoom
Memory –
DSP set DSP
Noise reductn On
Monitor amp. Auto
Digital zoom
Interpolate
Manual exp. Exp. priority