Filter
Top Products
When a large amount of image data is captured in a short
period, the camera’s internal buffer memory becomes full; the
frame counter turns yellow on the monitors. Time must be given
for this data to be written to the memory card. Wait for the
indicator to turn white before capturing more images.
Camera Notes
Compose the picture as described in the basic
recording section (p. 30). Press and hold the shutter-
release button all the way down (1) to begin taking
pictures. The camera continues to record images
until the maximum number has been taken or the
shutter button is released.
The built-in flash can be used with standard and high-
speed continuous advance, but the rate of capture is
reduced because the flash must recharge between
frames.
83
1