81
0.5 Ev
bracket
To make a flash bracket, raise the camera flash; the ambient exposure is not bracketed.
When using flash, single-frame advance is employed and the shutter-release button must
be pressed for each exposure.
When exposure brackets are made in S exposure mode, the aperture controls the
bracket. In A and M modes, the shutter speed controls the bracket; in M mode, pressing
the AE lock button during the bracket changes the exposure control to the aperture.
Compose the picture as described in the basic recording
section (p. 30).
To make an exposure bracket, press and hold the shutter-
release button all the way down (1); three consecutive images
are captured.
0.3 Ev
bracket
Normal
Under
Over
Normal
Under
Over
Frame counter
Bracketing mode
To make a white-balance bracket, press and release the
shutter button. Three consecutive images are made from
a single exposure.
1
The bracketing drive mode indicator is displayed when set. The remaining number of
frames in the series is displayed next to the indicator during the bracket.