Filter
Top Products
150
DISCONNECTING THE CAMERA FROM THE COMPUTER
DATA
-TRANSFER MODE
Windows Me, 2000 professional, and XP
Confirm that the access lamp is not lit. Turn off the camera and then disconnect the USB
cable.
Never disconnect the camera when the access lamp is lit - the
data or memory card may permanently be damaged.
To disconnect the camera, click once on the unplug-or-eject-hardware icon
located on the task bar. A small window will open indicating the device to be
stopped.
Windows 98 / 98 second edition
When more than one external device are connected to the computer, repeat the
procedure above except right click on the unplug-or-eject-hardware icon. This will open
the unplug-or-eject-hardware window after clicking on the small window indicating the
unplug-or-eject-hardware routine.
Click on the small window to stop
the device. The safe-to-remove-
hardware window will open. Turn
off the camera and then disconnect
the USB cable.