Filter
Top Products
32
B
ASIC RECORDING
FOCUS LOCK
Place the subject within the focus frame. Press and
hold the shutter-release button partway down.
• The focus signals will indicate that the focus is locked.
The shutter speed and aperture value will change from
white to black indicating the exposure is locked.
• When the focus is set, an AF sensor
is displayed on the
live image to indicate the point of focus.
Without lifting your finger from the shutter-release
button, recompose the subject within the image area.
Press the shutter-release button all the way down to
take the picture.
AUTOMATIC MONITOR AMPLIFICATION
In extremely low-light conditions when the camera-sensitivity gain has reached its limit,
the automatic monitor-amplification function will intensify the EVF and LCD monitor
image. The live image will be brighter. This will have no effect on the final image. This
function can be turned off in section 3 of the recording menu (p. 101).
The focus-lock function is used when the subject is off-center and outside the focus
frame. Focus lock may also be used when a special focusing situation prevents the
camera from focusing on the subject.