Filter
Top Products
90
R
ECORDING MENU
SPOT AE AREA
When using spot metering (p.
72) with the Flex Focus Point
(p. 48), the position of the spot
metering area can be specified
at the center of the live image
or linked to the Flex Focus
Point; the spot moves after the
position of the FFP is moved.
This is set in section 1 of the
recording menu (p. 84).
Center spot With Flex Focus Point
FLASH CONTROL
Automatic - automatically calculates flash exposure using a pre-flash.
Manual flash control - fires the flash at full power, 1/2, 1/4, 1/8, or 1/16 power. Manual
flash control cannot be used with red-eye reduction or with external flash units. Because
no pre-flash is used, it can be used to fire slave flash units.
Automatic and manual flash control are available. Flash control is changed in section 1
of the recording menu (p. 84).
Select the manual-flash option on the menu. Close
the menu.
Press the up key of the controller (1) to display the
exposure-compensation screen. Use the up/down
keys (2) to select the manual flash, and left/right
keys (3) to select the power ratio. Press the shutter-
release button partway down or press the center of
the controller to complete the operation.
Manual flash
:enter:adjl.:move
2
3
1