Filter
Top Products
20
G
ETTING UP AND RUNNING
BATTERY CONDITION INDICATOR
Full-battery indicator - the battery is fully charged. This
indicator is displayed when the camera is on.
Low-battery warning - battery power is very low. The battery
should be recharged as soon as possible. This warning
automatically appears and remains on the monitors until the
battery is recharged. The monitor will turn off while the flash is
charging to save power. If power falls below this level when the
camera is on, the battery-exhausted message appears just
before the camera shuts down. If the battery warning is
displayed, movie recording, movie editing, and UHS continuous
advance cannot be used.
Low-battery indicator - the battery is partially charged. The
monitor will turn off while the flash is charging to save power.
AUTO POWER SAVE
To conserve battery power, the camera will turn off the monitors and unnecessary
functions if an operation is not made within three minutes (auto power save). To restore
power, press the shutter-release button partway down or press the main switch. The
length of the auto-power-save period can be changed in section 3 of the setup menu (p.
141).
If an operation is not made within thirty minutes, the camera will shut down (auto power
off). Press the main switch to restore power.
This camera is equipped with an automatic battery-condition indicator. The monitor
indicator will change from white to red when battery power is low.