Filter
Top Products
The Anti-shake system minimizes the
affect of camera shake. Anti-shake is
employed when the shutter speed falls
below a certain limit depending on the
focal length in use. The effectiveness of
Anti-shake depends on the shutter speed
in use and the degree of shaking. The
system may not work with moving subjects
or when the camera is panned.
When the system is active, the Anti-shake
indicator appears. Anti-shake can be
turned off and on by pressing the Anti-
shake button (1).
36
B
ASIC RECORDING
Anti-shake is not effective with a tripod mounted camera; turn off the Anti-shake function
to conserve power.
If the camera is overheating because of operating and ambient temperatures, the Anti-
shake indicator turns red and the system will turn off automatically. Allow the camera to
cool before using Anti-shake.
Frame the subject as described in the
basic operation section and press the
shutter-release button partway down.
Confirm the image has stabilized on the
monitor and press the shutter-release
button all the way down to take the picture.
Anti-shake indicator
ANTI-SHAKE SYSTEM
1