Filter
Top Products
133
TRANSFER MODE
The data-transfer mode must be specified depending on whether the camera is used to
transfer data to a computer or print images with a PictBridge compatible printer. The
transfer mode option can be selected in section 1 of the setup menu. Select the
appropriate option:
Data storage - to transfer data between the camera and a computer. This option must
be selected when moving image files to a computer or when using the DiMAGE Viewer
software.
PTP - to print images with a PictBridge compatible printer.
ANTI-SHAKE
When the Anti-shake system activates can be changed in
section 4 of the setup menu. Two options are available:
Display + Exp. - when the shutter-release button is
pressed partway down, the anti-shake function will activate
if on. The affect of the Anti-shake system can be seen in the
live image.
Exposure - Anti-shake is only applied during the exposure and is not apparent in the live
image. When the shutter-release button is pressed partway down, wait a moment before
taking the picture for the Anti-shake system to stabilize the image.
Each time a delete command is used a confirmation
screen appears confirming the action to erase the image
data. When this screen opens, the no button is
highlighted. This function allows the yes button to be
initially highlighted to make deleting images easier. Care
should be taken when deleting images as the data
cannot be retrieved once erased. Delete confirmation
screen option can be selected in section 4 of the setup
menu.
DELETE CONFIRMATION
Delete this frame?
Yes
No
Anti-shake Display + Exp
Delete conf. “No”