Filter
Top Products
110077
110066
Setup menu
LANGUAGE
The language used in the menus can be changed. Highlight the
current language and press the center of the controller to open the
language setup screen.
AUDIO SIGNALS
When the shutter-release button is pressed partway down, an
audio signal gives a positive confirmation the AF system has
focused. This signals can be turned off in section 1 of the setup
menu (p. 102).
LLCCDDbbrriigghhttnneessss ––
DDaattaa ssttoorraaggee
EEnngglliisshh
DDaattee//TTiimmee sseett ––
NNTTSSCC
OOnn
TTrraannssffeerr mmooddee
VViiddeeoo oouuttppuutt
AAuuddiioo ssiiggnnaallss
L
Laanngguuaaggee
EEnngglliisshh
LLCCDDbbrriigghhttnneessss
DDaattee//TTiimmee sseett
TTrraannssffeerr mmooddee
VViiddeeoo oouuttppuutt
AAuuddiioo ssiiggnnaallss
LLaanngguuaaggee
Use the four-way keys of the controller to select the
menu language.
Press the central button of the controller to set the
language. Press the menu button to close the screen
without making any changes.
JJaappaanneessee EEssppaaññooll
CChhiinneessee
IIttaalliiaannoo
SSvveennsskkaa
EEnngglliisshh
DDeeuuttsscchh
FFrraannççaaiiss
LLaanngguuaaggee
::sseell.. ::eenntteerr
DATE AND TIME SETUP
It is important to accurately set the clock. When a still image is recorded, the date and time of the
recording are saved with the image and are displayed during playback or can be read with the
DiMAGE Viewer or DiMAGE Master software. When the Date/Time-set option is selected and
entered in section 1 of the setup menu, the date/time screen is displayed.
Use the left/right keys of the controller or rear control dial
to select the item to be changed.
Use the up/down keys or front control dial to change the
item.
Press the central button of the controller to complete the
operation.
22000044 .. 1100 .. 2233
1133 :: 1144
DDaattee//TTiimmee sseett
::eenntteerr::mmoovvee ::sseell
YYYYYYYY//MMMM//DDDD
FILE NUMBER (#) MEMORY
FFiillee ## mmeemmoorryy OOffff
SSttdd.. ffoorrmm
110000KKMM002233
––
FFoollddeerr nnaammee
SSeelleecctt ffoollddeerr
NNeeww ffoollddeerr
When file number memory is selected, if a new folder is created,
the first file stored in the folder will have a number one greater than
the last file saved. This allows multiple folders to be created, but
the image file numbers will be in the order in which they were shot.
If the file number memory is disabled, the image file name will
have a number one greater than the last image saved in the folder.
If file number memory is active and the memory card is changed,
the first file saved to the new card will have a number one greater
than the last file saved on the previous card if the new card does
not contain an image with a greater file number. If it does, the file number of the new image will be
one greater than the greatest on the card.