Filter
Top Products
110088
Setup menu
FOLDER NAME
100KM023
10141023
(Standard)
(Date)
110099
SELECT FOLDER
This option specifies in which folder images are saved. Only
folders with a standard folder name can be selected. If the date
folder name option is used, images are placed in a folder with the
corresponding date of recording. Select folder is in section 2 of the
setup menu (p. 102).
All recorded images are stored in folders on the memory card. Folder names
come in two formats: standard and date.
Standard folders have an eight character name. The initial folder is named
100KM023. The first three digits are the folder’s serial number, which increases
by one each time a new folder is created. The next two letters refer to Konica
Minolta, and the last three numbers indicate the camera used; 023 indicates a
Dynax 7D.
A date folder name also starts with the three digit serial number and is followed
by one register for the year, two register for the month, and two registers for the
day: 100YMMDD. The folder 10141023 was created in 2004 on October 23rd.
With the date folder format selected, when an image is recorded a new folder
with the day’s date is created. All images recorded that day are placed in that
folder. Images recorded on a different day are placed in a new folder with the
corresponding date. When a new folder is created, the serial number in the
image-file name is reset to 0001 unless file number memory is active. For more information on
folder organization and file names, see page 126.
FFiillee ## mmeemmoorryy OOffff
SSttdd.. ffoorrmm
110000KKMM002233
––
FFoollddeerr nnaammee
SSeelleecctt ffoollddeerr
NNeeww ffoollddeerr
NEW FOLDER
This allows the creation of new folders. The folder-name option in
section 2 of the setup menu specifies the folder-name format. If
multiple date-format folders are created, only the last folder can be
used for storing images.
Highlight “Enter” and press the center of the controller to create a
new folder.
The new folder name is displayed briefly. Every time a new folder
is created, the folder number increases automatically by one
greater than the highest folder number on the memory card.
FFiillee ## mmeemmoorryy
EEnntteerr
FFoollddeerr nnaammee
SSeelleecctt ffoollddeerr
NNeeww ffoollddeerr
110011KKMM002233 ffoollddeerr ccrreeaatteedd..
LLCCDD bbaacckklliigghhtt 55 sseecc..
33 mmiinn..
––
RReesseett ddeeffaauulltt ––
OOffff
““NNoo””
PPoowweerr ssaavvee
MMeennuuSSeecc..MMeemmoorryy
DDeelleettee ccoonnff..
CClleeaann CCCCD
D
LCD BACKLIGHT
The LCD monitor backlight turns off to conserve power after a
certain period. Press a camera button to restore the display. This
period can be set to 5, 10, 30, or 60 seconds in section 3 of the
setup menu (p, 102).
AUTO POWER SAVE
The camera shuts down to conserve battery power if no operation is made within a certain period.
The length of this period can be changed to 1, 3, 5, 10, or 30 minutes. To restore power, press the
shutter-release button partway down. When the camera is connected to the computer, the auto-
power-save period is set to ten minutes. This period cannot be changed.