Filter
Top Products
31
Leica SP2600 Ultramilling attachment
5.5.3 Clamping the vacuum stages on/in
the base plates
Clamping the vacuum stages in the base plate
with vise (Fig. 5.15)
Fasten the vacuum stage on the vacuum stage
adapter for the base plate with vise (with 4
Allen screws (1) / Allen key size 4).
The 4 size-four Allen screws are part of the
Vacuum stage adapter standard delivery, the
size-four Allen key comes as part of the Leica
SP2600 standard delivery.
Clamp the vacuum stage in the base plate with
vise.
For detailed instructions on how to do this,
please refer to chapter 5.5.2, page 41 Clamp-
ing specimen stages of the Leica SM2500 in-
struction manual: the vacuum stage is
clamped the same way as the specimen
stages described there.
Clamping the vacuum stages in the base plate
with dovetail guide (Fig. 5.16)
Fasten the vacuum stage on the vacuum stage
adapter for the base plate with dovetail guide
(with 4 Allen screws (1) / Allen key size 3).
The 4 size-three Allen screws are part of the
Vacuum stage adapter standard delivery, the
size-three Allen key comes as part of the Leica
SM2500 standard delivery.
Clamp the vacuum stage in the base plate with
dovetail guide.
For detailed instructions on how to do this,
please refer to chapter 5.5.4, page 44 Clamp-
ing the round specimen holder of the Leica
SM2500 instruction manual: the vacuum stage
is clamped the same way as the round speci-
men holder.
Fig. 5.15
Fig. 5.16
5. Operation
1