Filter
Top Products
45
Leica SP 2600 Ultramilling attachment
7. Cleaning, disinfection and maintenance
7.1 Cleaning and disinfection
Only authorized service technicians may access the internal com-
ponents of the instrument for service and repair!
Cleaning detergents appropriate for the ultramilling attachment -
varnished surfaces:
mild laboratory detergents (slightly moistened cloth)!
non-varnished metal parts:
mild laboratory detergents,
xylene substitutes (slightly moistened cloth)
alcohol (slightly moistened cloth).
No liquids may enter the interior of the instrument during cleaning!
Cleaning
Clean the basic instrument Leica SM2500 as per the instructions in chap-
ter 7.1, pages 65 - 67 of the Leica SM2500 instruction manual.
Clean the Leica SP2600 with a soft, slightly moistened cloth using one of
the detergents listed above.
Clean diamond millers with a soft cloth moistened with alcohol.
For disinfection of the instrument and accessories use Leica Cryo-
fect or other commercial disinfectants. - Use all disinfectants ac-
cording to the manufacturers instructions!
No liquids may enter the interior of the instrument during disinfec-
tion!
When disinfecting, wear appropriate goggles and mask as well as
protective gloves!
Dispose of potentially infectious specimen material as per the
laboratory regulations applicable in the country of operation!
Disinfection
Remove potentially infectious milling waste / remaining samples and dis-
pose of as per the regulations applicable.
Disinfect instrument and accessories as per the instructions of the disin-
fectant manufacturer.