Filter
Top Products
53
♦ Bold
The imprinter string is outputted with bold font.
Available settings vary depending on your scanner. Refer to “Relevant Image Scanner
Specification” in the Appendix.
♦ Initial Value (Counter)
Designates the initial count when the Imprinter String is set, including a counter value. See
the "Relevant Image Scanner Specification" described in the Appendix since the
programmable values range depends on the device.
♦ Counter Step (Counter)
Designates the counter increment of the set counter values. In other words, this value is
added to or subtracted from the counter each time one original is scanned.
An increment of 0, 1, or 2 may be specified. Usually, 1 is designated for a single-sided
original, and 2 for a double- sided original.
♦ Counter (Counter)
Designates whether to increase or decrease the specified step value.
♦ Imprinter String (Endorse)
Specifies the imprinter string.
The following characters can be outputted by the Imprinter.
Alphabet Letters : A-Z, a-z
Numeric Characters : 0, 1-9
Symbols : !”#$%&’()*+,-./:;<=>?@[\]^_`{|}~
Other : (Space)
(*The space is ignored when it is entered at the head of [String:].)