Filter
Top Products
VPort 2310 User’s Manual Getting Started
2-3
NOTE
After powering on the VPort 2310, wait a few seconds for the POST (Power On Self Test) to
run. The IP address will be assigned when the CONNECT LED is lit.
Using IP Reporter
1. Run IPReporter.exe to search for the VPort. After the IP Reporter window opens, you may
also click on the Search button to initiate a search.
2. When the search has concluded, the MAC address and IP address of the VPort will be listed
in the IP Reporter window.
NOTE
If the VPort has been assigned an IP address, the Assigned status will be listed as Yes. If the
VPort has not been assigned an IP address, the Assigned status will not be listed as Yes. In this
case, check to see if the VPort’s firmware version supports the DHCP installation function, or if
there is any problem with the network environment.