Filter
Top Products
VPort 2310 User’s Manual URL Commands of Video Server
A-6
Custom camera configuration URL
URL: /setup/custom.cgi
Name Value Description
baud <integer> set baud rate of COM
data <integer> set data bits of COM
1 set 1 stop bit of COM stop
2 <other than 1> set 2 stop bits of COM
None set parity check of COM to none
Odd set parity check of COM to odd
parity
Even set parity check of COM to even
up <text string shorter than 80 characters> tilt up command string of COM
down <text string shorter than 80 characters> tilt down command string of COM
left <text string shorter than 80 characters> pan left command string of COM
right <text string shorter than 80 characters> pan right command string of COM
home <text string shorter than 80 characters> home command string of COM
tele <text string shorter than 80 characters> zoom in command string of COM
wide <text string shorter than 80 characters> zoom out command string of COM
Application configuration URL
URL: /setup/app.cgi
Name Value Description
emode <not required> event mode application
smode <not required> sequential mode application
mail upload snapshots by email smethod
ftp upload snapshots by FTP
suffix <not required> FTP file with date and time suffix
delay <integer> seconds delay to detect next event
inter <integer> seconds delay to capture post-event
dihigh < not required > set DI high as trigger condition
dilow < not required > set DI low as trigger condition
dirise < not required > set DI rising as trigger condition
difall < not required > set DI falling as trigger condition
motion1 < not required > set motion window1 as trigger condition
motion2 < not required > set motion window2 as trigger condition
motion3 < not required > set motion window3 as trigger condition
ioalarm < not required > trigger DO when DI condition matched
mdalarm < not required > trigger DO when motion detected
ioupload < not required > upload snapshot when DI condition matched
mdupload < not required > upload snapshot when motion detected
sinter <integer> seconds interval for sequential mode
sbegin <hh:mm:ss> time to start sequential mode
send <hh:mm:ss> time to stop sequential mode