Filter
Top Products
4
4
Chapter 4 System Configuration
After installing the hardware, the next task required is to configure VPort 2310’s settings.You may
use one of three configuration methods: via web access, via FTP, and via Telnet.
This chapter includes the following sections:
!
System Configuration Via Web Access
" System
" Security
" Network
" DDNS & UPnP
" Video
" Motion Detection
" Application
" Camera Control
" Homepage Layout
" View log file
" View parameters
" Factory default
! System Configuration Via FTP
" CONFIG ini
! System Configuration Via Telnet
" Telnet Commands
" System core debugging
" Monitor changes to the digital input status
" Stop information dumping
" Query status of digital inputs
" Set digital outputs
" Erase snapshots stored in Flash memory
" Erase logo and graphic buttons
" Reset network to new settings
" Restore facotry default settings
" Reset system