Filter
Top Products
141
J
4 Choose the amount of smoothing.
To choose how much the boundaries
between the two images are smoothed,
highlight Smoothing and press 2.
The options shown at right will be
displayed.
Highlight an option and press J.
Higher values produce a smoother
composite image.
Uneven shading may be
visible with some subjects.
5 Frame a photograph, focus, and shoot.
The camera takes two exposures when the shutter-release
button is pressed all the way down.
l k will be
displayed in the control panel and l u in the
viewfinder while the images are combined; no
photographs can be taken until recording is complete.
Regardless of the option currently selected for release
mode, only one photograph will be taken each time the
shutter-release button is pressed.
If On (series) is selected, HDR will only turn off when Off is
selected for HDR mode; if On (single photo) is selected, HDR turns off
automatically after the photograph is taken.
The k icon clears from the display
when HDR shooting ends.
D Framing HDR Photographs
The edges of the image will be cropped out.
The desired results may not be achieved if the
camera or subject moves during shooting.
Use of a tripod is recommended.
Depending on
the scene, shadows may appear around bright objects or halos may appear around dark
objects; this effect can be reduced by adjusting the amount of smoothing.
A Interval Timer Photography
If On (series) is selected for HDR mode before interval timer shooting begins, the camera
will continue to shoot HDR photographs at the selected interval (if On (single photo) is
selected, interval timer shooting will end after a single shot).
Control panel
Viewfinder