Filter
Top Products
286
n
11 Range of rotation for AI 80–200mm f/2.8 ED tripod mount is limited by camera body.
Filters can not be
exchanged while AI 200–400mm f/4 ED is mounted on camera.
12 If maximum aperture is specified using Non-CPU lens data (0 172), aperture value will be displayed
in viewfinder and control panel.
13 Can be used only if lens focal length and maximum aperture are specified using Non-CPU lens data
(0 172).
Use spot or center-weighted metering if desired results are not achieved.
14 For improved precision, specify lens focal length and maximum aperture using Non-CPU lens data
(0 172).
15 Can be used in manual mode M at shutter speeds slower than flash sync speed by one step or more.
16 Exposure determined by presetting lens aperture.
In mode A, preset aperture using lens aperture ring
before performing AE lock and shifting lens.
In mode M, preset aperture using lens aperture ring and
determine exposure before shifting lens.
17 Exposure compensation required when used with AI 28–85mm f/3.5–4.5, AI 35–105mm f/3.5–4.5, AI
35–135mm f/3.5–4.5, or AF-S 80–200mm f/2.8D.
See teleconverter manual for details.
18 With maximum effective aperture of f/5.6 or faster.
19 Requires PK-12 or PK-13 auto extension ring.
PB-6D may be required depending on camera
orientation.
20 Use preset aperture.
In mode A, set aperture using focusing attachment before determining exposure
and taking photograph.
• PF-4 Reprocopy Outfit requires PA-4 Camera Holder.
• Noise in the form of lines may appear during autofocus at high ISO sensitivities. Use manual focus or
focus lock.