Filter
Top Products
205
Q
❚❚ HDMI Options
The HDMI option in the setup menu (0 249) controls output resolution and can be
used to enable the camera for remote control from devices that support HDMI-CEC
(High-Definition Multimedia Interface–Consumer Electronics Control, a standard
that allows HDMI devices to be used to control peripherals to which they are
connected).
Output Resolution
Choose the format for images output to the HDMI device.
If Auto is selected, the camera will automatically select
the appropriate format.
Regardless of the option
selected, Auto will be used for movie live view, movie
recording, and playback.
Device Control
If On is selected for HDMI >Device control in the setup
menu when the camera is connected to a television that
supports HDMI-CEC and both the camera and television
are on, the display shown at right will appear on the
television and the television remote can be used in place
of the camera multi selector and J button during full-
frame playback and slide shows.
If Off is selected, the television remote can not be
used to control the camera.
A HDMI and Live View
HDMI displays connected via an HDMI cable can be used for live view photography and
movie live view (0 49, 57).
During movie live view and movie recording HDMI output is
adjusted according to the option selected for Movie settings > Frame size/frame rate in
the shooting menu (0 65).
Note that some HDMI devices may not support the selected
setting; in this case, select 1080i (interlaced) for HDMI > Output resolution.
Movies may
be output at a frame size smaller than that selected for Frame size/frame rate (0 65).
A HDMI-CEC Devices
When the camera is connected to an HDMI-CEC device, ) will appear in the control panel
in place of the number of exposures remaining.
A Device Control
See the television manual for details.