Filter
Top Products
27
Device Registration: D2-Series/D100/D70/COOLPIX-Series Cameras
Windows 2000 Professional
The following explanation uses D100 as an ex am ple.
After in stall ing Nikon Capture 4 and re start ing
the com put er, con nect your cam era to the
com put er us ing a USB ca ble and turn the
cam era on. The cam era will be registered
au to mat i cal ly.
Follow the instructions below to check that the camera has been correctly registered with the
system.
Step 1
Right-click the My Computer icon on the
desk top. Open the System Prop er ties dialog
by se lect ing Properties from the menu that
ap pears. Open the Hardware tab and click
the Device Man ag er… button in the De vice
Man ag er area.
Logging On
Log on as Administrators to register the camera.
Before Connecting the Camera
Be sure to install Nikon Capture 4 before connecting your camera to the computer.
Step 2
The Device Manager will be displayed. After
con fi rm ing that Disk drives, Storage vol-
umes, and Uni ver sal Serial Bus con trol lers
are listed in the Device Manager, click the plus
sign (+) next to each of these device types.