Filter
Top Products
38
Windows
D1-Series Cameras
Windows XP Home Edition/Professional
Before You Begin
Confi rm that your OHCI-compliant IEEE 1394 interface board or card has been correctly reg-
is tered with the system.
Select Control Panel from the Start menu. In the
Control Panel window
, click the Per for mance
and Main te nance icon to open the Per for -
mance and Main te nance win dow. Click the
Sys tem icon in the Per for mance and Main te -
nance window to open the Sys tem Prop er ties
win dow. Select the Hardware tab and click
the Device Man ag er button to open Device
Man ag er window shown at right.
If “IEEE 1394 Bus host controllers” is not list ed in the Device Manager, or if your IEEE 1394
in ter face board or card is listed as an un known or mis cel la neous device or is pre ced ed by a
red or yellow warning icon, follow the in struc tions in the manual provided with the board to
ensure that the drivers are properly in stalled.
After installing Nikon Capture 4 and re start ing the computer, connect your cam era to the
computer using an IEEE 1394 cable and turn the camera on. The camera will be reg is tered
automatically.
Follow the instructions below to check that the camera has been correctly registered with the
system.
Step 1
Select Control Pan el from the Start menu
to open the Control Pan el window. Click
the Performance and Main te nance icon
inside the Control Panel window to open the
Per for mance and Main te nance window. Click
the System icon in side the Per for mance and
Main te nance win dow to open the Sys tem
Prop er ties window. Select the Hard ware
tab and click the Device Manager but ton
to open Device Manager window.
Af ter con-
fi rm ing that “Nikon 1394 Pro to col De vice” is
listed in the Device Man ag er, click the “+”
sign to its left.
Logging On
You will need to log on as the “Computer Administrator” to register your camera.
Before Connecting the Camera
Be sure to install Nikon Capture 4 before connecting your camera to the com put er.
The bus controller for
your IEEE 1394 board
or card should be list ed
un der “1394 Bus host
con trol lers.”