Filter
Top Products
The Setup Menu
142
Date Imprint
Data imprinted at a size of (640 × 480), (1,024 × 768), or (1,280 × 960) may
be diffi cult to read.
Regardless of the setting chosen, the date is not imprinted in movie ( 58) or panora-
ma assist ( 31) mode or at an image quality of RAW ( 33) or Continuous settings
of Continuous H, Ultra HS, or 5 shot buffer ( 88).
Imprinted data form a permanent part of the image and will
appear whenever the image is printed, regardless of whether
the date option is chosen in the Print set menu. At settings
other than Off, a date imprint icon appears in the shooting
display during shooting. Check before shooting to make sure
that the camera clock is set to the correct time and date.
The date is recorded in the order selected in the DATE menu. Date imprint can not be
selected if the camera clock has not been set ( 15–16).
The date imprint option is used to imprint the date or
the date and time of recording on pictures as they are
recorded to the memory card. It can not be used to
imprint a date stamp on pictures after recording.
Option Description
Off Time and date do not appear on pictures.
Date
Date is imprinted on pictures taken while this
option is in effect.
Date
and time
Date and time are imprinted on pictures tak-
en while this option is in effect.
DATE IMPRINT
Date
Date and time
Off
Select this option to display the current camera fi rm-
ware version. Press the multi selector to the left to
return to the setup menu.
E8400 Ver.1.0
Back
F2.6
F2.6
F2.6
8M
8M
8M
126
126
126
1/60
60
1/60
Date Imprint
Firmware Version
Date im
p
rint
Firmware version