Filter
Top Products
227
t
❚❚Interrupting Time-Lapse Photography
Time-lapse photography will end automatically if the battery is
exhausted. The following will also end time-lapse photography:
•Selecting Start > Off in the Time-lapse photography menu
• Pressing the J button between frames or immediately after a
frame is recorded
• Turning the camera off
• Removing the lens
• Connecting a USB or HDMI cable
• Inserting a memory card into an empty slot
• Pressing the shutter-release button all the way down to take a
photograph
A movie will be created from the frames shot to the point where
time-lapse photography ended. Note that time-lapse
photography will end and no movie will be recorded if the power
source is removed or disconnected or the destination memory
card is ejected.
❚❚No Photograph
The camera will skip the current frame if the camera is unable to
focus in AF-S (note that the camera focuses again before each shot).
Shooting will resume with the next frame.
A Image Review
The K button can not be used to view pictures while time-lapse
photography is in progress, but the current frame will be displayed for a
few seconds after each shot if On is selected for Image review in the
playback menu (0 289).
Other playback operations can not be
performed while the frame is displayed.
A See Also
For information on setting a beep to sound when time-lapse
photography is complete, see Custom Setting d1 (Beep, 0 318).