Filter
Top Products
265
Q
4 Exit the installer.
Click Ye s (Windows) or OK (Mac OS) when installation is
complete.
The following software is installed:
•ViewNX 2
• Apple QuickTime (Windows only)
5 Remove the installer CD from the CD-ROM drive.
Windows Mac OS
Click Ye s Click OK
D Connecting Cables
Be sure the camera is off when connecting or disconnecting interface
cables.
Do not use force or attempt to insert the connectors at an angle.
Close the connector cover when the connector is not in use.
A Windows
To visit the Nikon website after installing ViewNX 2, select All
Programs > Link to Nikon from the Windows start menu (Internet
connection required).
A Camera Control Pro 2
Camera Control Pro 2 software (available separately; 0 393) can be
used to control the camera from a computer.
When
Camera Control Pro 2 is used to capture photographs directly to the
computer, the capture mode indicator (c) will appear and the PC
connection indicator will flash in the top control panel.