Filter
Top Products
82
Connecting to Televisions, Computers, and Printers
Connecting to Televisions, Computers, and Printers
Connecting to a TV
Connect the camera to a television using the A/V cable to play back pictures on the television.
1 Turn off the camera.
2
Connect the COOL-STATION to the TV using the supplied A/V cable.
Connect the yellow plug to the video-in jack on the TV, and the white plug to the audio-in jack.
3 Tune the television to the video channel.
See the documentation provided with your television for details.
4 Place the camera in the COOL-STATION
and press o for more than one sec-
ond to turn on the camera.
The camera enters playback mode, and the pictures
taken will be displayed on the television.
While connected to the TV, the camera monitor will
remain off.
j Connecting an A/V Cable
When connecting the A/V cable, be sure that the camera connector is oriented correctly. Do
not use force when connecting the A/V cable to the camera. When disconnecting the A/V
cable, do not pull the connector at an angle.
j Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your television.
The video mode setting is an option set from setup menu (c 114) > [Interface] (c 126) >
[Video mode].
WhiteYellow