Filter
Top Products
14
Fig. 10
Fig. 11
2 One-Touch White Balance (OTWB)
(Fig. 10)
}Apart from the OTWB, the white balance can also be controlled with
manual white balance control, which sets the color temperature by direct
input (see page 21).
1. Press the MODE button 1 to select REC MANU. or REC AUTO.
2. Press the OTWB button 2 to display the white photographing screen.
3. In transmitted light observation, remove the specimen so that the entire
screen is white. In reflected light observation, use a sheet of white paper
as the specimen. When “OK” is displayed, press the SET/OK button 3.
4. If “NG” is displayed, retry from the beginning.
3 Checking the Live Image
(Fig. 11)
}The live image is used for focusing and displayed in other status than
during recording, playback and setups.
The magnification of the displayed live image can be varied between 1X
and 2X with electronic zooming.
To change the live image magnification
Press the MOVE button 1 to set to 2X and the MOVE button 2 to
return to 1X.
}The brightness and colors of the live images displayed on the LCD monitor
may differ from actually recorded pictures.
Fig. 12
4 Playing a Single Picture (PLAY)
(Fig. 12)
}The following procedure is used to display a picture on the LCD monitor
screen.
1. Press the MODE button 1 so that 2 in the LCD panel indicates PLAY.
}The LCD monitor will show the image of the last picture in the SmartMedia.
and the LCD panel shows “--”, followed by three digits of the folder name
and the last four digits of the file name.
2. Press either MOVE button or 3 to select the picture to be played.
: Press to display the picture before the current picture.
: Press to display the picture after the current picture.
}A procedure for automatic playback of picture frame by picture frame at
5-second intervals like a slide show is also available (see page 29).
When the played file is of the
DCF format, a 3-digit direc-
tory number and 4-digit file
number are shown on the
control panel.
1
2
³
2
@
2
@
³