22
3 Setting the ISO Rating (ISO)
Factory setup: 25
ISO rating
}The sensitivity (ISO rating) in recording can be set like a photo
film. The provided ISO values are set by converting the ob-
tained sensitivity into an ISO value of photography films.
Three ISO values including 25, 50 and 100 are available. A larger
value indicates that the camera becomes more suitable for
recording under low light or recording of quickly moving ob-
jects.
· When an other value than “25” is selected, the LCD panel shows “ISO”.
#Although increasing the ISO value makes the camera suitable for recording under low light, it also results in
increasing noise in the picture. Select the appropriate ISO value according to situations.
4 Setting the Sharpness
Factory setup: NORMAL
Soft
}The sharpness of picture can be selected from two options
including “NORMAL” and “SOFT”.
“NORMAL” provides a sharp picture which is suitable for print-
ing and viewing, while “SOFT” reproduces more natural con-
tours which is suitable for image processing on a PC. Select
the appropriate sharpness according to situations.
5 Setting the Beep Tone
Factory setup: ON
}The beep tone for warning, etc. can be set to be output when
necessary or not.
6
Setting the Time of Picture Display During Recording/Setting the Sleep Time
Factory setup: AUTO (REC VIEW)/OFF (SLEEP)
AUTO
5 sec.
OFF
OFF
1 min.
5 min.
10 min.
}Item REC VIEW selects whether or not a picture is displayed
on the LCD monitor during the period in which a picture is
recorded in the SmartMedia.
· After selecting item REC VIEW, press either MOVE button or
to select “AUTO”, “5 sec.” or “OFF”.
· When “AUTO” is set, the LCD monitor shows the picture during
its recording.
}When item SLEEP is set to other option than “OFF”, the LCD monitor turns off after the selected time period has elapsed
while you perform no operation on the camera system.
· After selecting item SLEEP, press either MOVE button or to select “OFF”, “1 min.”, “5 min.” or “10 min.”.
· When “OFF” is set the SLEEP function is deactivated.
Normal