Filter
Top Products
52
EN
2
Exposure
IMAGE OVERLAY
In playback mode, up to 4 frames of RAW images can be
overlaid and saved as a single image.
g“Image overlay” (P. 95)
Setting display
• When multiple exposure is set, u is displayed on the
control panel and super control panel. When shooting is
interrupted, u blinks and i is displayed in green on the
super control panel.
To cancel the image during shooting:
j Pressing the D button cancels the last picture taken.
To shoot multiple exposures while checking the composition for each frame:
j Take pictures using live view. The overlay images are displayed semi-transparently on the LCD
monitor so you can shoot while checking the position of the image overlay.
To overlay 5 or more frames:
j To overlay 5 or more frames, save the image as a RAW file and use [OVERLAY] to repeat the
multiple exposure shooting.
x Notes
• When multiple exposure is set, [SLEEP] is set to [OFF] automatically.
• RAW images taken with another camera cannot be used for the overlay image.
• When [OVERLAY] is set to [ON], the images displayed when a RAW image is selected are
developed with the settings at the time of shooting.
• To set the shooting functions, cancel multiple exposure shooting first. Some functions cannot
be set.
• Multiple exposure is canceled automatically in the following situations.
The camera is turned off/The q button is pressed/The MENU button is pressed/The n
button is pressed/The battery power runs out/The card is replaced/The LCD monitor is
closed/The USB cable, AV cable or the HDMI mini cable is inserted
• The information for the first frame during multiple exposure shooting is displayed as the
shooting information.
• When the picture mode is set to to , multiple exposure is not available with the MYSET
or Y/X.
Menu MENU[X][MULTIPLE
EXPOSURE]
Control panel
TIPS
FRAME
AUTO GAIN
OVERLAY
OFF
OFF
OFF
MULTIPLE EXPOSURE
BACK SET
s0033_e_00_0_unified.book 52 ページ ２０１０年１１月１６日 火曜日 午後５時２４分