Filter
Top Products
79
EN
5
Flash shooting
3 Turn on the flash.
• When the charge lamp on the flash lights up,
charging is complete.
• The flash will be synchronized with the
camera at a speed of 1/250 sec. or less.
4 Select a flash mode.
5 Select the flash control mode.
• TTL-AUTO is recommended for normal use.
6 Press the shutter button halfway.
• Shooting information such as ISO sensitivity,
aperture value, and shutter speed is
communicated between the camera and flash.
7 Press the shutter button all the way.
x Notes
• The built-in flash cannot be used when an
external flash is attached to the hot shoe.
Super FP flash
Super FP flash is available with the FL-50R or FL-36R. You
can use the Super FP flash even where normal flashes
cannot be used with high shutter speed.
Fill-in flash shooting with the aperture open (such as in
outdoor portrait shooting) is also possible with Super FP
flash. For details, refer to the external flash’s manual.
Viewfinder
Super FP flash
s0033_e_00_0_unified.book 79 ページ ２０１０年１１月１６日 火曜日 午後５時２４分