Filter
Top Products
98
EN
7
Playback functions
Lets you erase recorded images. You can select single-frame erase, which erases only the
currently displayed image; all-frame erase, which erases all the images stored on the card; or
selected frame erase, which erases only the frames selected.
x Notes
• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG,
both the RAW and JPEG images are erased. When using single-frame erase, you can select
whether to erase the JPEG, RAW, or both RAW and JPEG images. g“RAW+JPEG
ERASE” (P. 115)
• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. g“Protecting images” (P. 97)
Single-frame erase
1 Display the images you want to erase and press the D
button.
2 Use ac to select [YES], then press the i button.
Erasing selected frames
This function lets you erase selected images at one time during single-frame playback or
index display.
1 Display the images you want to erase and press the i button.
• The selected images will be shown with v.
• To cancel your selection, press the i button again.
• Press p to select the images you want to erase and press the i button.
2 After you have selected the images to erase, press the D button.
3 Use ac to select [YES], then press the i button.
All-frame erase
1 MENU[W][CARD SETUP]
2 Use ac to select [ALL ERASE], then press the i button.
3 Use ac to select [YES], then press the i button.
• All frames will be erased.
To erase immediately:
j If you have set “QUICK ERASE” (gP. 115) to [ON], pressing the D button will erase an image
immediately.
j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 116)
Erasing images
TIPS
D button
s0033_e_00_0_unified.book 98 ページ ２０１０年１１月１６日 火曜日 午後５時２４分