Filter
Top Products
62
EN
3
Focusing and shooting functions
You can select the interval from the time the mirror is raised until the shutter is released. This
diminishes camera shake caused by vibrations when the mirror moves. This feature can be
useful in astrophotography and microscope photography or other photographic situations
where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum.
1 MENU[c][V][ANTI-SHOCKz]
2 Select the time delay after the mirror is raised and until the shutter is released
from 1/8 to 30 seconds and press the i button.
3 Anti-shock is added to the shooting functions individually (single-frame shooting,
sequential shooting, self-timer shooting, and remote control shooting). For the
setting method, see “Sequential shooting” (gP. 59).
You can reduce the amount of camera shake that easily occurs when shooting in low light
situations or shooting with high magnification.
OFF Image stabilizer is off.
I.S. 1 Image stabilizer is on.
I.S. 2 This is used for panning with the camera in the horizontal direction to achieve a
blurred background. The horizontal image stabilizer is turned off, and only the
vertical image stabilizer is activated.
I.S. 3 This is used for panning with the camera in the vertical direction to achieve a blurred
background (tilting). The vertical image stabilizer is turned off, and only the horizontal
image stabilizer is activated.
Anti-shock
Image stabilizer
Super control panel ip: [IMAGE STABILIZER]
Menu MENU[X][IMAGE STABILIZER]
s0033_e_00_0_unified.book 62 ページ ２０１０年１１月１６日 火曜日 午後５時２４分