Filter
Top Products
Copyright© 2002-2003 Pacific Digital Corporation Page 22
will make the image available in the Windows Clipboard for
subsequent Paste.
6.5.4 Inserting an image into a slideshow
In addition to the Drag&Drop and Paste functions discussed earlier,
you can also Insert an image from a directory or storage device with
the “Insert” option available in the Edit menu. This option will ask
you to specify the location or Browse to find.
6.5.5 Rotating an image in a slideshow
Some of your pictures will have been taken with the camera in a
horizontal position, and others in a vertical position. The Rotate 90º
option allows you to set the proper orientation to display any
particular photo. When you select Rotate 90º, Digital PixMaster will
rotate the currently selected picture 90º to the right. Select the
image you wish to rotate and then rotate it as many times as
necessary until you reach the desired orientation.
6.5.6 Hiding an image in a slideshow
You may not want to delete an image from a slideshow, but still not
want to display it in that slideshow. Un-checking Show Slide
allows you to hide that particular slide. This setting can also be
reversed to unhide the slide in the show.
6.5.7 Copying images from one slideshow to another
Since Digital PixMaster can have only one slideshow open at one
time, you must open/start another session of Digital PixMaster (by
double clicking on its icon again or invoking from the Windows
Program list), in order to copy images from one slideshow to
another show. With two instances of Digital PixMaster running,
you can copy & paste images from one show to another.
6.5.8 Image Properties: Transition Effects and Timings
Digital PixMaster features a wide variety of transitions between
images. The software allows you to assign transitions, fill colors,
and set the slide display duration time for each individual slide (or
apply to all slides). Figure 12 below shows the Image Properties
screen.