Pacific Digital MF-810 Digital Photo Frame User Manual


 
Copyright© 2002-2003 Pacific Digital Corporation Page 57
Onboard Memory: 32 MB RAM & 20MB Flash memory
PC Interface: USB 1.1 Target interface
Monitor Output: VGA D-sub 15 pin (MF-810S only)
Audio Jack: Stereo audio jack 3.5mm (MF-810S only)
Audio Format: WAV (MF-810S only)
AC Adapter: North America: 120 VAC, 60 Hz, 17w
Europe: 220-240 VAC, 50 Hz, 17w
Dimensions: 10 x 11.75 x 2 in
(254 x 298 x 51 mm) (w/h/d)
Weight/Mass: 62 oz. (1761g)
Environment: 32 – 85
0
F, 0-30
O
C,
30-80% RH (non-condensing)
Accessories: USB cable, software CD-ROM, wood frame
13.1 Federal Communications Commission Statement
Instructions to User: This equipment has been tested and found to
comply with the limits for a class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, contact the manufacturer. The user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for
help.