Pacific Digital MF-810 Digital Photo Frame User Manual


 
Copyright© 2002-2003 Pacific Digital Corporation Page 48
The “Locked” position is toward the outside of the unit.
Remove the stand from the back of the MemoryFrame by
rotating out of its holder, then place the MemoryFrame on its
back with the LCD up towards you.
Push the frame lock tab inwards towards the frame with one
hand while lifted the edge of the frame closest to the tab
upward about one (1) inch.
The lifted edge of the wood picture frame can now be slid
towards the opposite edge past the two fixed tabs and then
lifted free.
To install decorative frames on the MemoryFrame
Read the section of the manual “Caring for the Screen”
(Chapter 10.2) before removing the decorative frame. Try to
avoid touching the LCD screen during this process.
After removing (as described above) the wood picture frame
that came with MemoryFrame, remove the stand from the
back of the MemoryFrame by rotating out of its holder, then
place the MemoryFrame on its back with the LCD up
towards you.
At a slight angle, place one edge of your new wood frame
onto the face of the MemoryFrame housing, and then slide
the frame towards the two fixed tabs.
Push the frame lock tab inwards towards the frame with one
hand while pushing the edge of the frame closest to the tab
down onto the frame, then pull the frame lock tab to the
locked position (towards outer edge of unit).
Replace the stand into the back of the MemoryFrame by
rotating into its holder, then fold out the Stand from the rear
of the MemoryFrame. Choose the orientation that you prefer
either portrait (vertical) or landscape (horizontal) orientation,
and set the MemoryFrame on a flat surface.
10.5 Showing PowerPoint Slides on MemoryFrame
You can display a combination of text, photos and PowerPoint slides
to make presentations or to use MemoryFrame as a point-of-purchase
shelf-talker. With the MF-810S stereo model you can also add voice or
music to the show. PowerPoint allows you to save your slides as TIFF or
JPEG images (using the save-as function) or to be pasted into other