Filter
Top Products
Copyright© 2002-2003 Pacific Digital Corporation Page 38
picture prior to the currently displayed thumbnails, the prior thumbnail
will appear on the screen, and so on until the first picture is displayed.
When you have reached the beginning of your pictures, the Reverse (◄)
navigation button will not let you navigate back any further.
Changing a Picture’s Display Characteristics
When you press ‘Select’ to select a picture, the menu options for
that picture will apply to that picture. This sub-menu allows you to
set the attributes of your slideshow without a PC (the time the
photos are displayed, the photo transition effects, as well as the
ability to hide and delete photos, etc).
First, find a picture where you want to change either the time
displayed, transition effect, hide, or delete it. Then, press the Select
button. After the Select button is pressed, the MemoryFrame will
display the Configure Slides menu choices underneath the
thumbnail display.
The picture configuration menu items presented for the
selected photo are:
Duration: (time)
Transition: (type)
Background Color: (current color)
Show This Slide: (yes or no)
Delete Slide
Rotate 90 Degrees
Record Audio
Select Another Slide
Exit Configuration Menu
Most of these settings apply only to the selected thumbnail, while
some allow you specify an option to “apply the setting to all
photos.” Each photograph in the slideshow can have different
effects, delays, etc.
Once a thumbnail is selected, the Forward (►) and Reverse (◄)
navigation buttons operate on the menu items and not on the
thumbnails. Each of these Configure Slideshow menu choices are
described below.
9.2.3.1 Exit Configuration Menu
When you want to exit the Configure Slides sub-menu, select “Exit
Configuration Menu.” This will bring you back to the Main Menu from