Filter
Top Products
Copyright© 2002-2003 Pacific Digital Corporation Page 52
Figure 22 – Examples of wood frames
Size of Frames that Fit MemoryFrame
The frames can be of various dimensions, but they must fit 8” x 10”
pictures. The inner dimensions of frames that fit are approximately
20.4cm x 25.5 cm. The outer dimensions of the frames that work can
vary by as much as 2 cm in each direction. For example, as you can see
in the Figure 22, the rear-middle frame shown is slightly wider and taller
than the rest and this is fine.
Types of Frames that Fit MemoryFrame
In general, most frames come in three different basic types in terms of
how the photo and the stand mechanism are retained (secured) into the
frame. These three types are briefly described below. The first two
types are not usable by MemoryFrame, and only the third type described
will fit MemoryFrame:
1. Some frames supply retention for the photo and the stand
mechanism by having metal clips attached to the wood itself which
either swivel or bend over the stand mechanism to provide retention.
Please note, that MemoryFrame cannot use this type of frame,
so purchase only type #3 below.
2. The second type of frames have a slot in the bottom such that the
glass, picture, and stand-mechanism all slide up from the bottom of
the frame. Please note, MemoryFrame cannot use this type of
frame, so purchase only type #3 below.