Panasonic AJ-Spd850p Camera Accessories User Manual


 
53
Setup menus (continued)
No./Item Description
USER menu <TIME CODE> USER menu <VIDEO>
510
TC OUT REF
This is used to switch the phase of
the time code, which is output from
the TIME CODE OUT connector, for
the external LTC input when the TCG
switch is at the EXT position.
0000
V OUT :
Time code is synchronized with output
video signal.
0001 TC_IN :
Time code is synchronized with
external time code input.
511
VITC OUT
This selects how the VITC which is to
be superimposed onto the output
video signal during playback is to be
output.
0000
SBC :
The time code recorded in the sub
code area is output as the VITC.
0001 VAUX :
The time code recorded in the VAUX
area is output as the VITC.
514
VITC GEN
This selects whether or not to record
the internal time code generator value
in the VAUX area.
0000
OFF :
The internal time code generator
value is not recorded in the VAUX
area.
When video signals on which the time
code has been recorded are input, the
time code of the input signals is
recorded in the VAUX area.
0001 ON :
The internal time code generator
value is recorded in the VAUX area.
Note:
If 1394 has been selected as the input
signals, the time code on the input
compressed signals will be recorded
regardless of this menus setting.
The underlined items indicates the initial setting.
No./Item Description
600
INT SG
This selects the internal signal.
0001 BB :
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003
CB75 :
75% color bars are generated.
601
OUT VSYNC
This selects whether to float the
vertical sync position of the video
output in order to align the video
output phase with the input in the
EE/record/edit modes.
0000
N-VF : Signals are not floated.
0001 VF : Signals are floated.
603
CC (F1)
BLANK
This selects ON or OFF for the closed
caption signal of the first field.
0000 BLANK :
Signal is forcibly blanked.
0001
THRU : Signal is not blanked.
Note:
This menu option is not displayed in the
625i system.
604
CC (F2)
BLANK
This selects ON or OFF for the closed
caption signal of the second field.
0000 BLANK :
Signal is forcibly blanked.
0001
THRU : Signal is not blanked.
Note:
This menu option is not displayed in the
625i system.
605
FREEZE SEL
This selects the freeze mode for still
pictures.
0000
FIELD : Field freeze.
0001 FRAME : Frame freeze.
Notes:
When frame freeze has been selected,
the frame slow status is established
with the slow setting.
This setting is also followed when there
is a freeze command from the RS-422A
connector, but the picture displayed on
the LCD monitor screen shown at this
time will not be frozen.
606
OUT C KILL
This selects chroma color killer
processing for the video output
signals.
0000 B/W :
No color signals are output.
0001
COLOR :
Color signals are output.
Sub code area:
This area is separate from the video and audio data area on
the P2 card. The time code complying with SMPTE/EBU
standards is stored here.
VAUX area:
This area is to be found in the video data area on the P2 card.
The additional information relating to the video data is
stored here.