Panasonic AJ-Spd850p Camera Accessories User Manual


 
66
Audio V fade function
When the settings below are selected for audio processing
between clips or events (setup menu No.727: PB FADE) at
times such as during clip selection and playback or play list
playback, V fade or cut processing is performed for these
sections during playback.
The clips recorded over a multiple number of P2 cards and
the clips created by edit copying are shown in the figure
below.
Clips extending over more than one P2 card or
automatically divided and recorded clips using a P2 card
with a memory capacity of 8 GB or more
Event A Event B
Clip 2
Noise appears at the edit splice.
Clip 1-1 Clip 1-2
Clip 1
Clip 1-1
Clip 1
Clip 1-2
Event A Event B
Clip 2
V fade is performed instantaneously between all clips
and events to reduce noise.
Event A Event B
Clip 2
Clip 1-1 Clip 1-2
Clip 1
When FADE is selected
V fade processing is performed for all the sections
between clips and between the events of edit-copoed
clips.
V fade is performed instantaneously to
eliminate the noise.
Event A Event B
Clip 2
Clip 1-1 Clip 1-2
Clip 1
Clip created by edit copying
When CUT is selected
When AUTO has been selected
V fade is automatically performed except between
events when clips extending over more than one P2
card or clips automatically divided and recorded using a
P2 card with a memory capacity of 8 GB or more have
been registered on a play list.
Described below is an example where the above two types
of clips are to be played back using the play list function.
Note:
This setting takes effect only when the power is on.