Filter
Top Products
65
Video output signals and servo reference signal
This section explains how the output signals and servo
reference signal are selected.
External synchronization of video output signals
The video output signals are output in synchronization with
the REF VIDEO input signal or video input signal.
As shown in the figure below, this signal is selected in
accordance with the setup menu settings, deck mode and
availability of the video input signal.
Notes:
Synchronization is determined as follows depending
on the availability of the REF VIDEO input signal when
“BB”, “CB100” or “CB75” has been selected as the setup
menu No. 600 (INT SG) setting.
•When the REF VIDEO input signal is available:
Synchronization with the REF VIDEO input signal
•When the REF VIDEO input signal is not available:
Internal synchronization
Start
What is the
setup menu No. 304 (REF
LOCK) setting?
Has the unit
been set to the recording
mode?
Is the
REF VIDEO input signal
available?
Internal synchronization
Is the
REF VIDEO input signal
available?
Synchronization with the
REF VIDEO input signal
What is the
setup menu No. 601 (OUT
VSYNC) setting?
Is the
video input signal available?
Is the
video input signal a composite
signal?
What is
the setup menu No. 303
(STD/NON-STD)
setting?
Is the
video input signal a standard
or non-standard
signal?
Synchronization with
the video input signal
EXT
AUTO/AUTO1
NO
NO
YES
YES
N-VF
NO
NO
YES
VF
NO
YES
YES
AUTO
STD
STD
NON-STD
NON-STD