Filter
Top Products
60
USER menu <V BLANK>
The underlined items indicates the initial setting.
No./Item Description
803
TELETEXT
DET
[525i system]
00
REC LINE1
:
12
REC LINE13
[625i system]
00
REC LINE1
:
14
REC LINE15
This selects the lines in which the
teletext signals are to be recorded.
[625i system]
0000
OFF
0001 7&320
0002 8&321
0003 9&322
0004 10&323
0005 11&324
0006 12&325
0007 13&326
0008 14&327
0009 15&328
0010 16&329
0011 17&330
0012 18&331
0013 19&332
0014 20&333
0015 21&334
0016 22
[525i system]
0000
OFF
0001 10&273
0002 11&274
0003 12&275
0004 13&276
0005 14&277
0006 15&278
0007 16&279
0008 17&280
0009 18&281
0010 19&282
0011 20&283
0012 21&284
0013 22
Sub-screen
This selects the method used to
detect the lines in which the teletext
signals are to be recorded.
0000
OFF :
The teletext signals are not recorded.
0001 AUTO :
The teletext signals are automatically
detected and recorded.
0002 MANU :
The lines in which the teletext signals
are to be recorded are selected and
set.
Notes:
•The number of lines in which the
teletext signals can be recorded
depends on the number of recording
lines which was entered as the setup
menu No. 800 (ADD LINE 25) or No.
801 (ADD LINE 50) setting. [See
“Number of lines which can be set for
TELETEXT.”]
•When setting “MANU” is selected and
the STOP button is pressed, operation
transfers to the sub-screen, and the
number of recording lines can be
selected.
To return from the sub-screen, press
the STOP button again.
•When the input signal is a non-standard
signal or N-STD has been selected for
the setup menu No. 303 (STD/NON-
STD) setting, teletext signals will not be
played back correctly in EE mode.
Setup menus (continued)
No./Item Description
Sub-screen
[525i system]
00
LINE 10&273
:
11
LINE 21&284
[625i system]
00
LINE 7&320
:
15
LINE 22&335
0000
BLANK :
Blanking is forcibly effected.
0001 THRU : No blanking is effected.
804
BLANK LINE
This turns the blanking ON or OFF in
the vertical blanking period of the
video output signals.
0000
BLANK :
Blanking is effected forcibly for all
lines.
0001 THRU :
No blanking is effected for any of the
lines.
0002 MANU :
Blanking ON or OFF is selected for
each line.
Note:
When setting “MANU” is selected and
the STOP button is pressed, operation
transfers to the subscreen, and ON or
OFF can be selected for each line. To
return from the sub-screen, press the
STOP button again.