Filter
Top Products
Preparation
For assistance, please visit http://www.panasonic.com/phonehelp 17
Registering the unit
Registering the unit
Register the unit to your base unit. The unit
will be assigned an extension number by
your base unit.
Important:
LBefore registering this or any other
compatible Panasonic units to your base
unit, we recommend you change your
base unit’s PIN so that other Bluetooth
devices in the area are not accidentally
registered at the same time. For more
information, see the operating
instructions included with your base unit.
1 Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
LAfter {INTERCOM} starts flashing,
the rest of the procedure must be
completed within 2 minutes.
2 Cordless video camera station (KX-
THA16):
Press {OK} (F3), then wait until the unit
beeps.
LIf you have changed the base unit’s
PIN, enter it and press {OK}, then
wait until the unit beeps.
Note:
LIf for some reason the unit is not
registered to a base unit, use the
following procedure to register it to the
base unit.
{MENU} (F6) i x i {SELECT}
i “Registration” i {SELECT}
i “Registration” i {SELECT}
i Repeat step 1. i {OK}
If you have already canceled the unit’s
registration at the previous base unit,
follow steps 1 and 2.
Deregistering the unit
The unit can cancel its own registration.
1 {MENU} (F6) i x i {SELECT}
2 “Registration” i {SELECT}
3 “Deregistration” i {SELECT}
4 {3}{3}{5} i {OK}
Setting the unit before
use
Display language
1 {MENU} (F6) i x i {SELECT}
2 “Change language” i {SELECT}
3 Select the desired setting. (Default:
“English”)
4 Press the soft key (F6) to save. i
{OFF}
Note:
LIf you select a language you cannot
read, press the soft key (F6),
{#}{1}{1}{0}{1}, and {SAVE} to
change the display language to English.
THA16.book Page 17 Thursday, March 9, 2006 6:43 PM