Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 63
RF connect error LThe unit has lost communication with the base unit.
Move closer to the base unit, and try again.
LConfirm that the base unit’s AC adaptor is plugged in.
LRaise the base unit antennas.
LThe unit’s registration may have been canceled. Re-
register the unit (page 17).
LThe resources available for wireless communication
(making or answering calls with a handset, monitoring
camera images from a computer, etc.) are limited.
Therefore, depending on the combination of wireless
features being conducted at the same time, your
desired operation may not be possible. Wait for other
users to finish and try again.
PC search error LMake sure that you have registered the unit using the
MULTI TALK V Printer Utility. Refer to the “Installation
Guide for MULTI TALK V Software” included with your
base unit.
LMake sure that the computer is turned on.
IP address is wrong LEnter a valid IP address (page 57). You cannot use a
global IP address.
Subnet mask is
wrong
LEnter a valid subnet mask (page 57).
Display message Cause & solution
THA16.book Page 63 Thursday, March 9, 2006 6:43 PM